 |
|
|
|
 |
|
|
|
|
|
|
|
 |
|
|
|
Hand-pressurized precision pumps that handle
anything!
Press Control+D to bookmark page
Add a GoatThroat link to your site
|
|
 |
Accessories are available for use with GoatThroat pumps in almost any application. (See Compatibility Guide to verify compatibility with your application.)
|
|
|
|
|
|
|
|
Rebuild or Refurbish Information
Very aggressive liquids can damage o-rings and check valves over time. For example, if your pump leaks from the tap, you can replace o-rings yourself. See the Troubleshooting Guide to diagnose and solve the usual problems. Purchase either maintenance kits for periodic repair of tap o-ring or full o-ring replacement kits here.
If you have had your pump for several years and some of the internal parts (i,e., check valves which are not user-serviceable) have worn, or if you incorrectly used it with the wrong fluid, the factory can refurbish it for you rather than throwing the pump away. This is good for the environment rather than filling up the landfill with plastic and less expensive than purchasing a new pump. Please call us at 866-639-4628 and we can diagnose the issue over the phone and make a recommendation as to what you need. |
| | |
|
| SCP-6500 Pumps with Static Conductive Plastic |
 |
|
|
Special Features: SCP-6500 Pumps allow class 2 flammable liquids to be pumped using GoatThroat Pumps’ unique technology.
Applications ranges: Alcohols, flammable solvents, volatile hydrocarbons.
The latest pumping solution for spill-free, environmentally safe transfer of flammable liquids is in production now. The SCP-6500 Pumps will be available March 1, 2010. Featuring a lug with a grounding wire on the front of the pumps, and made with conductive plastic, the SCP-6500 Pumps allow users of flammable liquids to ground the pumps, making them safe for use with class 2 flammables. All components of this new pump which come in contact with the fluid are created with conductive plastic, so there is grounding of the liquid, the pump, and, with correct bonding, to the container.
ORDER STATIC CONDUCTIVE PUMP NOW
|
| |
|
| | |
|
| GoatThroat VSP-6800 System Vapor DeGreaser Pumps delivers Fluids to Solvent Vapor Degreasers and other high VOC materals with no Emissions |
 |
|
Applications ranges: Chlorinated Solvents and Fluorinated Solvents such as Novec™ HFE and Azeotropes.
With current transfer methods and because of the highly evaporative nature of both fluorinated and chlorinated solvents, users of vapor degreasers lose substantial inventory when transferring the fluids from storage containers to the vapor degreasers.
GoatThroat Pumps has developed a system to deliver the fluids from the container through the vapor zone of the vapor degreaser directly to the fluid chamber with no loss of liquid. The GoatThroat System eliminates the fugitive inventory loss and helps to keep the work environment cleaner from such emissions.
The GoatThroat VSP-6800 System features the GT300 Pump with Viton seals, the RT300 remote discharge nozzle outfitted with Tygon FEP lined 200SE flexible hose, and a hard plastic pipe which delivers the fluids directly into the chamber below the chillers. While the system can be operated by hand, a BGA Pneumatic Adapter can be added to the system to increase ease of use when shop air is present.
GoatThroat Pumps have a cost-effective life expectancy of 10 to 15 years, and provide for spill-proof, virtually emission-free transfer of both chlorinated and fluorinated solvents.
ORDER SOLVENT VAPOR DEGREASER PUMP NOW
|
| |
|
| | |
|
| BillyGoat™ Adapter (BGA) for Pneumatic Operation |
  |
|
GoatThroat pumps, long valued for their innovative design combined with a simple, safe, and clean hand-operated fluid delivery system, bring another innovative advancement to the industrial marketplace.
These small, versatile pumps can now safely be used with shop air, air compressors or bottled compressed air in the shop, in the field -- anywhere, any time.
The BillyGoat adapter features two external pressure safety valves. The new compressor setup delivers fluids at up to 4.5 gallons per minute with a working pressure of just 2PSI.
This revolutionary development will make it even easier to:
|
Transfer fluids from several containers
Deliver fluids to locations from 5' - 60' away, with a vertical lift of 8 to 10 feet (at 6 PSI)
Empty a 55 gallon barrel completely
Use our sprayer wand to apply disinfectant and cleaning agents
Decant and apply cleaners and degreasing agents
|
|
| ORDER PNEUMATIC ADAPTER NOW |
|
| | |
|
| Pneumatic Filters |
 |
![]()
 |
|
| ARO F35121-400 |
|
ARO-Flo compressed air filters are designed to remove airborne solid and liquid contaminants. Standard filters are sold with 5-micron elements.
Clean air is a key ingredient that enables effective and efficient use of tools, equipment, and machinery in almost every industry. As such, the use of air preparation devices, such as filters, regulators, and lubricators (FRLs) is an excellent means of keeping your air supply in top condition, as well as enabling your tools and equipment to operate at their peak performance. The new ARO-Flo series FRLs from Ingersoll Rand continue the tradition of offering premium products for your operation, and also raises the bar in the industry for safety, flow performance, and modularity.
ORDER FILTER AND FILTER REPLACEMENT NOW
|
| | |
|
| GoatThroat Multi-Pump Dispensing System |
|
 |
 |
|
|
|
The new GT Multi-pump Dispensing System is the latest addition to its line of cost-effective pumping solutions for spill-free, environmentally safe transfer of virtually any chemical or liquid.
Designed to expand capability and streamline operations where multiple process chemicals are dispensed, the new GT Multi-Pump Dispensing System uses a manifold to allow simultaneous multiple liquid transfer stations to operate from a single compressor line with only 2psi. The basic system can handle up to four pumps simultaneously, and additional system components can be added to meet any requirement.
Delivering fluid from multiple containers with 2psi, the system features a regulator with a low-volume air pressure gauge, automatic external pressure relief at 6psi, automatic shut-off quick-connect air fittings on the manifold as well as on each pump.
ORDER MULTI-PUMP SYSTEM NOW
A Case history on the GT Multi-Pump System can be seen here.
|
| | |
|
|
Remote Discharge Nozzle and Extension Hoses
|
|
Click to download large printable version of this photo
|
|
|
A remote discharge tap can greatly extend the versatility of GoatThroat pumps. Ideal for transfer of liquids and chemicals from large drums, the remote nozzle allows precise, one-hand flow control, leaving the other hand free for work.
The thumb-operated tap dispenses liquids as easily as using a faucet. Pressurized liquids can be easily transferred to levels up to 10 to 12 feet higher than the container, which is impossible with traditional gravity-fed liquid transfer methods. And our patented drip-proof design helps keep work areas clean and prevent potentially hazardous spills.
Remote discharge taps are available singly, or with several hose options. RT100W/H5 (shown above left) comes fitted with a 5-foot PVC hose for permanent connection to the pump body. RT100W/H10 includes a 10-foot hose. All hoses are PVC, and quick-connect fittings have nylon connectors. RT 100/200/300 and body barb fitting (shown above left) are made of polypropylene. Please check compatibility of PVC with your liquid by reviewing the PVC Tubing Compatiblity Guide and the TYGON Tubing Compatiblity Guide.
Tygon 2075/2375 hose is available for special applications. Tygon 200S, FEP-lined hose, is available for very aggressive fluid applications. Tygon 4040 is available for fuel applications.
ORDER REMOTE DISCHARGE TAP NOW
|
|
| | |
|
|
| | |
|
GT Filter Pak
This kit allows for screening of fluids with an 80 x 80 stainless 304 mesh at the tube intake. Fittings are available in Nitrile, EPDM and Viton to match your pump.
|
| | |
|
 |
|
Spout Reducer
This adapter allows easy filling of small-necked containers. Outside diameter is 3/8-inch. Push to insert into tap, pull to extract. Click here for ordering information .
|
|
| | |
|
O-ring Repair Kit
Just the essential O-ring and other necessary elastomeric parts are available for all user-accessible parts in Nitrile, EPDM, Santoprene and Viton. |
| | |
|
|
|
|
|
|
Buttress Adapters Click here for buttress size chart
These adapters compensate for containers with a coarse thread that cannot easily accommodate standard GoatThroat drum seals. Made of polyethylene plastic, each adapter includes a large O-ring to provide an airtight seal. Adapters are available for the most common drum aperature diameters of 2.25" (Asia), 2.5" (U.S.) and 2.75" (Europe). Click here for ordering information.
|
|
| | |
|
| |
  |
| |
| |
   |
|
Specialty Fittings and Adapters
Click here for the Specialty Adapter Selection Guide.
The 5G-RPS-GT-226-101 (ADAPTER RIEKE FLEXSPOUT) adapter for BLACK CAPS allows the pumps to be used on containers which feature a Rieke® FlexSpout®. This eliminates tipping of the container and associated spill hazards. Supplied with Nitrile washer as standard, EPDM and Viton® washers are also available. We also now offer an adapter for the new RIEKE FS II FLEXSPOUT ADAPTER for GREY CAPS, p/n 226-201.
Fittings are now available for containers with Reike External 70MM closures, SC-76R, SC-76RTE, SC-86 and SC-86TE. Ask for P/N 226-102.
The 5G-BGC-GT p/n 226- adapter for Blitz 5-gallon gasoline cans allows safe dispensing of fuels as does the 5G-SGC-GT for Scepter Gas Cans.
The High Pressure Adapter - p/n 226-107 permits GoatThroat Pumps to be semi-permanantly fixed to the drum by threading on to both the pump and the drum. This is ideal when the pump and container are on a moving vehicle or in a high pressure situation.
The 5G-MCA-GT p/n 226-116 adapter is now available to allow GoatThroat Pumps to be used with 5 gallon and other metal cans with a 54.5 mm external thread. Please specify liquid or pump when ordering so that the correct gasket is provided.
The 5G-N83B-GT p/n 226-113 adapter is now available to allow GoatThroat Pumps to be used with Nalgene bottles with the 83B cap. Please specify liquid or pump when ordering so that the correct gasket is provided.
Many other special adapters are available. We can also customize a fitting for your application. Please call for details.
Click here for ordering information.
|
| |
|
| | |
|
 |
|
Pump Standoffs
Standoffs raise the pump level to compensate for drums with a high lip, allowing small containers to be placed beneath the tap. Pump standoffs are available in 4-inch heights to fit plastic containers, and in 4-inch heights for galvanized steel drums. The new 12-inch standoff allows you to place the receiving container on the drum for easier transfer. Always match plastic standoffs to plastic drums, and steel standoffs to steel drums. All of these fittings are National Pipe Tapered and seal with PTFE Tap. Alternatively, use a lock-nut with appropriate o-ring. See lock-nut instructions.
Straight Pipe Threaded Standoffs
We now offer Straight Pipe Threaded fittings for drums which have this thread. Generally this opening will be found on steel drums. This NPS fitting seals with a washer instead of PTFE tape.. Please specify o-ring material to match your pump when ordering these fittings.
Click here for ordering information.
|
| |
|
| | |
|
DRUM SEALS
Standard models come with medium size drum seal (2.0”) which fit the Standoff and all other GoatThroat fittings. To fit other containers, large (2.25”) and small (1.81”) drum seals are available from your dealer. |
| | |
|
5 Gallon Tank
Winpak® Tight Head Pail is a self-supporting plastic container constructed of high molecular weight, high density polyethylene, and is designed for the secure, dependable shipment and storage of liquid products. Winpak® is cylindrical in shape with spout placement in line with the sidewall for maximum removal of product during dispensing. The unit is also equipped with a swing handle on the top face. Meets UN Packaging Type 1H1 and applicable FDA regulations. Has the standard 70mm liquid tight cap with 3/4" NPT center. Ideal for use with sanitary chemicals, flavorings/concentrates, edible oils, pharmaceutical preps, ag-chem chemicals, NEC photochemical x-ray & electronic diagnostic substances, petroleum products, misc. food & kindred products, powders. Not for fuels or oils. Neck size is 70mm. Click here for ordering information. |
| | |
|
 |
|
Replacement Parts
Parts are available should you need them. Please specify pump model number and color when ordering.
|
|
| | |
|
 |
|
MolyKote
Molykote 111, a superior Dow Corning product, is the recommended silicon lubricant for use with GoatThroat Pumps, and is safe for use with food. Click here for ordering information.
|
|
| | |
|
|
| | |
|
GoatThroat for Laboratories - The Problem Solver
For fast, safe transfer of more than 1000 liquids and chemicals
Get the full story in the Technical Articles below. Contact us at: 866-639-4628 or write us with any question you have.
FOR MORE INFORMATION, GO TO OUR HOME PAGE.
|
|
See it in action, 3 minute video. GoatThroat Product Demonstration
This maintenance-free, environmentally sound, chemical drum pump allows fast safe transfer of more than 1000 liquids and chemicals. See the searchable data base to select the best pump for your application.
Fits nearly any container from 5-gallon pails to 55-gallon drums. Just pump a few strokes to pressurize, then dispense precisely controlled amounts as needed with one touch of the tap -- as easily as opening and closing a faucet.
Patented leak-proof design conserves inventory, keeps work areas clean and prevents potentially hazardous spills. And unlike expensive electrical pumps, GoatThroat Pumps cost less, require no power, and create no potential sparking hazard.
10-year life expectancy gives excellent value.
The Pump for Flammable Liquids was awarded the prestigious 2010 Product of the Year by Plant Engineering Magazine.
LET OUR INDUSTRY EXPERTS HELP YOU TO SELECT THE RIGHT PUMP FOR YOUR FLUIDS.
- Visit our website: Home Page
- Call us: 866 NewGoat (639 4628)
- Email us: info@goatthroat.com or fill out the contact us form to improve worker safety and regulatory compliance with GoatThroat Pumps.
Order by March 8 with coupon code CEJULE, and receive a 10% discount off your order.
|
|
|
|
| | |
|
For fast, safe transfer of more than 1200 liquids and chemicals
Get the full story in the Technical Articles below. Contact us at: 866-639-4628 or write us with any question you have.
FOR MORE INFORMATION, GO TO OUR HOME PAGE.
|
|
This maintenance-free, environmentally sound, chemical drum pump allows fast safe transfer of more than 1000 liquids and chemicals.
See the searchable data base to select the best pump for your application.
Fits nearly any container from 5-gallon pails to 55-gallon drums. Just pump a few strokes to pressurize, then dispense precisely controlled amounts as needed with one touch of the tap -- as easily as opening and closing a faucet.
Patented leak-proof design conserves inventory, keeps work areas clean and prevents potentially hazardous spills. And unlike expensive electrical pumps, GoatThroat Pumps cost less, require no power, and create no potential sparking hazard.
10-year life expectancy gives excellent value.
All pumps are made from Food Grade materials making them safe for food contact. Please read our Food Grade Documentation.
The Pump for Flammable Liquids was awarded the prestigious 2010 Product of the Year by Plant Engineering Magazine.
LET OUR INDUSTRY EXPERTS HELP YOU TO SELECT THE RIGHT PUMP FOR YOUR FLUIDS.
- Visit our website: Home Page
- Call us: 866 NewGoat (639 4628)
- Email us: info@goatthroat.com or fill out the contact us form to improve worker safety and regulatory compliance with GoatThroat Pumps.
Order by March 8 with coupon code CEJULE, and receive a 10% discount off your order.
|
|
|
|
| | |
|
SEE SPECIALTY GUIDES FOR PUMP SELECTION
- Click here for Lawn-Landcare and Golf Specialty Chemical Guide
|
| | |
|
